GE IC698CPE020 central processing CPU module Supplier,GE IC698CPE020 central processing CPU module Manufacturer,GE IC698CPE020 central processing CPU module Factory

Description

GE IC698CPE020 central processing CPU module Specification

Processing Speed: 700 MHz
CPU Memory: 10 Mbytes
Floating Point: Yes
Serial Ports: 3
Serial Protocols: Modbus RTU Slave, SNP, Serial I/O
Embedded Comms: RS-232, RS-486. Ethernet interface
Warranty: One-year warranty

Demi will give you best pricce !

Sales Manager:Demi
Email:sales8@askplc.com

Skype: +86 18030235312

Mob/Whatsapp/Wechat :+86 18030235312

About the GE IC698CPE020 central processing CPU module

Manufactured by GE Automation, the IC698CPE020 is a CPU from the PACSystems RX7i series. It is capable of real-time machine control and communicates with other rack modules via a standard VME backplane. Operation and control of the IC698CPE020 is accomplished by a connected computer or by an on-board three-position switch, which can be disabled if desired.

This GE IC698CPE020 device has a 700MHz Pentium III floating point microprocessor. Standard execution speeds for this processor are 0.14ms for every 1000 Boolean contacts. Ten megabytes of volatile memory (RAM) and 10 megabytes of flash memory (NVRAM) are available for use. A CMOS battery is required to support volatile memory. Flash memory is non-volatile. RAM and NVRAM can be used for user data, programming configuration, storing symbolic variables, and any information associated with the register. The operating system firmware is also stored in NVRAM. To update firmware, simply connect the IC698CPE020 to a computer using the proper serial port and run the update software.

Follow the procedures outlined in the manual while installing. Record the device’s MAC address. Power off the rack. In rack slot one, insert the IC698CPE020. Connect the device to the Ethernet LAN. Restore rack power. Connect the CMOS battery.

The IC698CPE020 has three serial ports and two Ethernet ports. For Ethernet connections, a category 5 shielded or unshielded RJ-45 twisted pair cable is needed, as well as TCP/IP configuration. Supported serial ports include RS-232 and RS-485. The third serial port is a station manager port.

Our service

1. High quality
2. Timely delivery
3. We provide a large number of branded parts.
4. We have experienced employees and extensive testing facilities.
5. There is a lot of inventory.

Recommended model

GE	YOKOGAWA	OTHER
DS200TBCAG1AAB	ADV151-P03 S2	MDS 402 6GT2000
745-W2-P5-G5-HI-R-E	AAI141-H00 S1	KDS 1.1-050-300W0 232260
DS200SNPAH1ABB	ADV161-P00 S2	KDS 1.1-050-300W1 232260
IS200HSLAH1ADE	AAT141-S50 S2	2KJ1501-7FM13-1HC2-Z
IS200HSLAH2A	PW101 S2	1FK7063-5AF71-1UU5-Z
CT/VT8H UR8HH	ARM55W-000 S1	MAC112D-0-ED-3-C
UR7IH	ADV141-S12 S1	KA47 DAS100 14/TH/IS
IS200VTURH2BAC	AD5*D	ED503URFI140
IC600BF929	AAI835-S50 S3	MAC090C-1-GD-1-B/110-A
UR6FH	PW482-10 S2	19F5CBH-YA00 V4.00.00
DS200FSAAG1A	ADV151-P53 S2	SRU 50.1 358102
IC697MDL250	ADV551-P00 S2	1FK7103-5AF81-1SH3-Z S11
DS3810MMBB1A1A	ANT502-5F S1	MCA 17N17-RS0B0-Z0F0
IS200WETBH1ABA	ADM52-2 S4	8LSA57.DB030S200-3
IS200EISBH1A	DX11*A	HPS90300064 E- ER321-3.0/4K
IS200EPCTG1AAA	DP97*B	SH11C M 090 ME CBP LM2 RV
IC697MDL250	ADV561-P10 S1	Vogel K300 287576
UR6AH	PW482-S01	SERVAX 100-FH2C 243250
CT/VT8H UR8HH	ANB10D-S1	SH11C109200004
IS200EISBH1A	AAR145-S53 S1	CM10-3 A-R-A-E-AQQE O-A-N
IC600BF929	AAI543-S50 S1	GKS06-3M VBR 090C32
UR 7HH UR7HH	ASS9562DK-00	MAC112C-0-HD-4-C
IS200VTURH2BAC	RS81*B AS S9826AM	MAC112B-3-PD-2-C/130-B-0
UR6FH	DP97*B AS S9032AL	RF47 DT90S4/2/BMG/HF

Our company sells new and surplus products and develops channels to purchase such products. This site is not approved or endorsed by any of the listed manufacturers or trademarks.Our company is not an authorized distributor, dealer or representative of the products displayed on this site.All product names, trademarks, brands and logos used on this site are the property of their respective owners.The description, illustration or sale of products under these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Questions ( 6 )

Can we use our own shipping account?
Yes, we can ship the products by your shipping account

How many days the goods will come?
It will take about 3-5 days through DHL/Fedex/UPS express

Do you offer global delivery?
Yes, We have shipping partner company allowing us to provide swift global delivery of parts to any corner of the world.

What is the payment term?
Our Payment Term is 100% advance payment through T/T bank transfer.

Are your products new or refurbished?
All our products are original new with one year warranty.

Can you pls share actual pictures of your stock?
Sure, we can not only share the picture, but also video call to check the products

We found other products you might like!

GE IC693BEM321 I/O Link Master Module

The GE Fanuc IC693BEM321 I/O Link Master Module can be connected with up to 16 I/O link slave modules in order to form a proprietary GE Fanuc link for monitoring and controlling complex processes needing a high response velocity. As many as 1024 inputs and 1024 outputs can be handled from a single master module, making it an ideal solution for adding processing power to preloaded GE Fanuc programmable logic controllers.

GE DS3800HCMC1A1B Circuit Board

The GE DS3800HCMC1A1B circuit board is a high-performance control and monitoring device designed for industrial and process control applications. It features multiple input and output interfaces, ensuring excellent compatibility with various industrial equipment. Its high reliability and durability make it suitable for complex and demanding environments, enabling precise signal control and data processing. This product is for enhancing system efficiency and stability.

GE IC697ALG230 Analog Input Module

The IC697ALG230 is a Series 90-70 PLC, base converter module. This module is formerly manufactured by GE Fanuc, now under Emerson. It is used with IC697ALG440 current expander and IC697ALG441 voltage expander module. This base converter module features Eight (8) differential inputs individually configurable for voltage or current signals specifically, 4-20 mA current input signal and -10VDC / +10 VDC voltage input signals with channel resolution of 16-bits.

GE IC697CPX772 Single Slot Processor

The IC697CPX772 is a Series 90-70 CPU from Emerson, formerly by GE Fanuc. This processor is installed with 96 MHz, 80486DX4 microprocessor and Boolean processing speed of 0.4 microseconds. It supports configuration of up to 2K inputs and outputs of any combination and can accommodate up to 8K analog I/O. It has user memory of 512 KB Slow battery-backed RAM and 256K Flash Memory. It has One (1) RS232 RJ11 Serial port and Two (2) 9-pin D-shell RS485 communication interface. This module is a single slot processor and configured using MS DOS and Windows Programming software package.

GE IS200VTURH1BAA IS200VTURH1B Thermocouple Processor Board

IS200VTURH1BAA is a turbine specific primary trip board developed by GE. It is a part of Mark VI control system. The turbine control board VTUR plays a pivotal role in overseeing various critical functions within the turbine system, each aimed at ensuring safe and efficient operation. Its multifaceted functions encompass a range of monitoring, controlling, and safeguarding measures that contribute to the overall integrity and functionality of the turbine system.

GE UR6TH Digital I/O Module

The GE UR6TH Digital I/O Module is a versatile and reliable component designed for industrial systems. It provides a range of digital input and output capabilities, enabling seamless integration with various control applications. With robust construction, the UR6TH module ensures high performance in demanding environments, offering features like fast response times and extensive signal processing. Its compatibility with GE's control systems makes it an ideal choice for enhancing operational efficiency and reliability in manufacturing processes.

GE IS420YAICS1B Analog I/O Module

IS420YAICS1B is an analog I/O module designed and developed by GE. It is a part of GE Mark VIeS control system. The Analog I/O pack (YAIC) is an electrical interface that connects one or two I/O Ethernet networks to an analog input/output terminal board. The YAIC includes a processor board shared by all Mark VIeS Safety control distributed I/O packs as well as an acquisition board dedicated to the analog input function. The I/O pack supports up to ten analog inputs, the first eight of which can be configured as 5 Vor 10 V or 4-20 mA current loop inputs.

GE IS210AEPSG1BCB Printed Circuit Board

GE Mark VI IS210AEPSG1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE's speedtronic series. The IS210AEPSG1BCB is a board created by GE for the Mark VI system. This system was released as part of the Speedtronic line of gas/steam turbine management systems that was developed and released by General Electric starting with the Mark I in the 1960s and continuing with various iterations until they finished the series with the Mark VI and Mark VI in the 1990s.

GE IC698CPE020 central processing CPU module

We found other products you might like!

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry