Tel : +86-18030170117

Email : plc@mvme.cn

What Are You Looking For?
EMERSON Deltav GE Series 90-70 3500/15 3500/42M 3500/33 HIMA safety systems EMERSON DeltaV system ABB Circuit Board ABB 800xA series 3BHB005727R0001 UNS2880A-P V1
Request A Quote
banner
Home GE

GE Fanuc IS220PSVOH1A SERVO PACK

GE Fanuc IS220PSVOH1A SERVO PACK
GE Fanuc IS220PSVOH1A SERVO PACK
GE Fanuc IS220PSVOH1A SERVO PACK

GE Fanuc IS220PSVOH1A SERVO PACK

IS220PSVOH1A is a servo pack module developed by General Electric (GE) for its Mark VIe series control system. This module is mainly used to control servo valves to achieve precise control of actuators (such as valves, regulators). It is widely used in the control of steam and gas turbine systems. The IS220PSVOH1A module has 1 or 2 I/O Ethernet interfaces that can be connected to the TSVO servo terminal board. In addition, it is equipped with a WSVO servo drive module to control two servo valve position loops.

  • Product Status

    Original New // Ready in Stock // Same Days Shipping
Inquiry now
Description

Specification IS220PSVOH1A

Model: IS220PSVOH1A
Manufacturer: General Electric (GE)
Series: Mark VIe
Type: servo pack
Power consumption: about 25 watts
Weight: about 0.5 kg


Contact Demi for the best price and delivery time！


Sales Manager : Demi Li
Email:sales8@askplc.com
Mob|Whatsapp :+86 18030235312
Skype:  +86 18030235312
Wechat : +86 18030235312

Detail IS220PSVOH1A


The IS220PSVOH1A is an electrical interface that connects a TSVO servo terminal board to one or two I/O Ethernet networks. The WSVO servo driver module is used by the IS220PSVOH1A to control two servo valve position loops.
A front faceplate with various LED indications is included with the PSVO. Four LEDs display the state of the two Ethernet networks (ENet1/Enet2), as well as a Power and Attn LED and two ENA1/2 LEDs. There's also a single infrared port on the front, but it's not used in this pack.
After installation, the Control System Toolbox application is used to setup the IS220PSVOH1A. A CPU board with input power connectors, local power supply, and an internal temperature sensor are included in the kit. The board also has flash memory and RAM. This board is linked to a purchase board.
When the IS220PSVOH1A is replaced, it can be auto-reconfigured. This feature can be activated or disabled in the ToolboxST application's Component Editor. The operator can also manually reconfigure the module using the Component Editor.
The I/O pack must be manually reconfigured when a terminal board is changed. Stroking the actuator in manual mode, position ramping, or step current can all be used to test servo performance. Any irregularities in the actuator stroke will be displayed on the trend recorder.
Manufacturer user guides and manuals might provide more information about this and other parts of the board, their installation and operation, as well as any potential compatibility difficulties.

Our Benifit


We are biggest suppliers in China. 

1.lower your support costs

2.Warranty: 12 months.

3.Lead time: 1-2 working days.

4.Type of payment: T/T bank wire transfer

5.Courier partners: DHL, UPS, TNT, FedEx and EMS.


Main Products


Specializing In:
Control Systems (DCS, PLC, CNC)                
Panel Controllers
HMI and Display Panels
Drives
Servo Motors
Encoders and Resolvers
Power Supplies


Contact our manager Demi to get the best price！  Email:sales8@askplc.com


Advantageous Brand


DCS: ABB, Honeywell, Yokogawa, Hima, Emerson,Foxboro, Triconex, Ovation, Woodword,  Kuka...
PLC: Schneider Modicon, GE Fnauc, Siemens, Prosoft, Woodhead,Fuji, Hollysys, Bachmann,  Mitsubishi, Yaskawa, Panasonic, Omron...
TSI: Bentley Nevada, EPRO, ENTEK ... 


Hot selling models

GE Fanuc

Honeywell

OTHER

IC695CPU315

FC-FANWR-24R

XBTGT2110 V2.0.53.0 5.7

IC695CPU320

FC-IOTA-R24

AAM10 x12/ AAM50 W/ AMN11

IC695CPU310

FC-MCAR-02

9907-018 2301A / 131-5454

IC694DNM200

FC-PDB-0824P

9907-018  2301A  / 131-5454

IC694MDL753

FC-PSUNI2424

SCON-CA-100A-DV-0-2

IC695ALG600

FC-RUSIO-3224

6SN1118-0DM11-0AA1

IC694MDL660

FC-TELD-0001

PCA-6186 A1 1906618608

IC694PWR331C

FC-TSKUNI-1624

National SS Motor SSC-812C

IC694MDL741

FS-BCU-0036

09509-0102-000-00

IC693ALG392

FS-CCI-HSE-02

RA-221 211-306

IC693MDL930

FS-CCI-HSE-30

240V 710-614634-002

IC694PWR321B

FS-MB-0002

PADC 65/13 ASML

IC695ACC400

FS-PDC-FTA24P

PCF8575.PCB ECC.DCD_V2

IC693ALG390

FS-PDC-MB24-1P

CG 06/01 855 500 01231

IC693MDL752

CC-TAOX01

P-AFX-6757M-01-Rev2

IC693MDL655

CC-TAOX11

Multi-Cash MC-8 CPU V2.01.06.24

IC693APU300

DC-TAOX51

2218-010slcpeb 21098864

IS220PDOAH1A

DC-TAOX61

D2200-M 16- 556611-01

IS220PAICH2A

CC-PAON01

MR-J3-40T-KK235T050

IS220PDIAH1A

CC-TAON01

CNHM02-6085-51 V63M/4

IS220PDOAH1A

DC-TAON01

VSM3003

IS220PAICH2A

CC-PAIX01

LAUER PCS-090 PCS090

IS220PDIAH1A

CC-PAIH01

Arbor HiCore i6414

IS220PDOAH1A

CC-PAIH02

Mini8/8LP/0PRG/VL/DNETM12

IS220PAICH2A

CC-TAID01

403606E-00520 SW.V 3.32E

IS220PDIAH1A

DC-TAID01

W7752D-2007 W/ W7752D2007

IS220PDOAH1A

CC-TAIX01

530-9A42 V4.51PG/R2.0 SRC505

IS220PAICH2A

CC-TAIX11

PCO3000AL0 . 2.011 PCO3

IS220PDIAH1A

DC-TAIX51

SBC PCA-6179


NOTE:Sales Plc Limited sells new and surplus products and develops channels to purchase such products. This site is not approved or endorsed by any of the listed manufacturers or trademarks.Our company is not an authorized distributor, dealer or representative of the products displayed on this site.All product names, trademarks, brands and logos used on this site are the property of their respective owners.The description, illustration or sale of products under these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Questions ( 7 )
  • Some items obsolete already，why you can provide brand new items?
  • We bought the items and keep it in our warehouse for many years, so they're still new and unused.
  • Can we use our own shipping account?
  • Yes, we can ship the products by your shipping account
  • How many days the goods will come?
  • It will take about 3-5 days through DHL/Fedex/UPS express
  • Do you offer global delivery?
  • Yes, We have shipping partner company allowing us to provide swift global delivery of parts to any corner of the world.
  • What is the payment term?
  • Our Payment Term is  100% advance payment through T/T bank transfer.
  • Are your products new or refurbished?
  • All our products are original new with one year warranty.
  • Can you pls share actual pictures of your stock?
  • Sure, we can not only share the picture, but also video call to check the products
Hot Tags : IS220PSVOH1A GE Fanuc IS220PSVOH1A IS220PSVOH1A SERVO PACK GE SERVO PACK IS220PSVOH1A PLC Module IS220PSVOH1A IN STOCK

We found other products you might like!

GE IC693BEM321
GE IC693BEM321 I/O Link Master Module
The GE Fanuc IC693BEM321 I/O Link Master Module can be connected with up to 16 I/O link slave modules in order to form a proprietary GE Fanuc link for monitoring and controlling complex processes needing a high response velocity. As many as 1024 inputs and 1024 outputs can be handled from a single master module, making it an ideal solution for adding processing power to preloaded GE Fanuc programmable logic controllers.
GE DS3800HCMC1A1B
GE DS3800HCMC1A1B Circuit Board
The GE DS3800HCMC1A1B circuit board is a high-performance control and monitoring device designed for industrial and process control applications. It features multiple input and output interfaces, ensuring excellent compatibility with various industrial equipment. Its high reliability and durability make it suitable for complex and demanding environments, enabling precise signal control and data processing. This product is  for enhancing system efficiency and stability.
GE IC697ALG230
GE IC697ALG230 Analog Input Module
The IC697ALG230 is a Series 90-70 PLC, base converter module. This module is formerly manufactured by GE Fanuc, now under Emerson. It is used with IC697ALG440 current expander and IC697ALG441 voltage expander module. This base converter module features Eight (8) differential inputs individually configurable for voltage or current signals specifically, 4-20 mA current input signal and -10VDC / +10 VDC voltage input signals with channel resolution of 16-bits.
GE IC697CPX772
GE IC697CPX772 Single Slot Processor
The IC697CPX772 is a Series 90-70 CPU from Emerson, formerly by GE Fanuc. This processor is installed with 96 MHz, 80486DX4 microprocessor and Boolean processing speed of 0.4 microseconds. It supports configuration of up to 2K inputs and outputs of any combination and can accommodate up to 8K analog I/O. It has user memory of 512 KB Slow battery-backed RAM and 256K Flash Memory. It has One (1) RS232 RJ11 Serial port and Two (2) 9-pin D-shell RS485 communication interface. This module is a single slot processor and configured using MS DOS and Windows Programming software package.
GE IS200VTURH1BAA IS200VTURH1B
GE IS200VTURH1BAA IS200VTURH1B Thermocouple Processor Board
IS200VTURH1BAA is a turbine specific primary trip board developed by GE. It is a part of Mark VI control system. The turbine control board VTUR plays a pivotal role in overseeing various critical functions within the turbine system, each aimed at ensuring safe and efficient operation. Its multifaceted functions encompass a range of monitoring, controlling, and safeguarding measures that contribute to the overall integrity and functionality of the turbine system.
GE UR6TH
GE UR6TH Digital I/O Module
The GE UR6TH Digital I/O Module is a versatile and reliable component designed for industrial systems. It provides a range of digital input and output capabilities, enabling seamless integration with various control applications. With robust construction, the UR6TH module ensures high performance in demanding environments, offering features like fast response times and extensive signal processing. Its compatibility with GE's control systems makes it an ideal choice for enhancing operational efficiency and reliability in manufacturing processes.
GE IS420YAICS1B
GE IS420YAICS1B Analog I/O Module
IS420YAICS1B is an analog I/O module designed and developed by GE. It is a part of GE Mark VIeS control system. The Analog I/O pack (YAIC) is an electrical interface that connects one or two I/O Ethernet networks to an analog input/output terminal board. The YAIC includes a processor board shared by all Mark VIeS Safety control distributed I/O packs as well as an acquisition board dedicated to the analog input function. The I/O pack supports up to ten analog inputs, the first eight of which can be configured as 5 Vor 10 V or 4-20 mA current loop inputs.
GE IS210AEPSG1BCB
GE IS210AEPSG1BCB Printed Circuit Board
GE Mark VI IS210AEPSG1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE's speedtronic series. The IS210AEPSG1BCB is a board created by GE for the Mark VI system.  This system was released as part of the Speedtronic line of gas/steam turbine management systems that was developed and released by General Electric starting with the Mark I in the 1960s and continuing with various iterations until they finished the series with the Mark VI and Mark VI in the 1990s.

What Our Clients Say?

5 out of 5
ive made several...

ive made several order with sales plc.the buying propose was superb,and the staff mr king and ms demi very helpful.keep up the good job guys

Paul Bunnell, August 15,2024
5 out of 5
Easy to deal wit...

Easy to deal with, great follow up service, lead time was what was stated in website. Excellent all round.

David Jerrow, September 20,2024
5 out of 5
Fantastic servic...

Fantastic service, information received was quick & well priced. My contractor advised barrier control parts were obsolete & I was looking at around £16k to replace. These guys sourced the parts needed for just over £600.

Peter Maier, July 25,2024

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Quick Link
Hot Tags
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District
Phone +86-18030170117
Email plc@mvme.cn

Disclaimer : Salesplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2024 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Home

Products

whatsApp

Contact Us

About Us

Salesplc has a team of experienced professionals working closely with overseas suppliers to provide our customers with a wide selection of products to meet their needs about delivery, price and brands . Salesplc advantage lies not only in our ability to provide products, but also in our ability to establish close links with direct users, system integrators and provide professional spare parts solutions to enhance customers' competitiveness in their own markets. Integrated procurement, online component solutions at any time, 24/7 and 365 days a year to place orders. To meet the specific needs of many manufacturing customers, we have deployed a range of supplies,With our multi-channel distribution network and strong warehouse support, we are able to optimize the supply chain and provide competitive prices. 20 years ago, we set sail with a dream,20 years later, we are shouldering more hopes and expectations. Thanks to every friend who supports us, it is your trust that keeps us moving forward. Looking back, we are grateful; looking forward to the future, we are full of confidence! Celebrate the 20th anniversary together and welcome a more brilliant tomorrow! We will continue to provide the best service and quality assurance to our customers all over the world in the coming days, welcome to inquire for the latest discount offer!     Our warehouse is capable of holding up to 60,000 pallet spare parts as a regional hub, enabling us to store a wide range of products. This improves efficiency by providing our customers in the global region with faster delivery times and lower prices. Sustainable Partnership   Salesplc is committed to building sustainable partnerships with customers and suppliers. It's a win-win-win situation. Sustainability also means responding to trends, evolution and innovation. This flexibility is also a guarantee of the future.We always focus on top brand products, top industrial partners innovation and industrial automation in the delivery of new components. Our sales office ensures that your to inquiries about spare parts are responsive. We actively participate in the customer's search for spare parts solutions or provide customized delivery advice. The customer's spare parts demand or delivery time question is always important to us.   + Availability, + Responsiveness: Your satisfaction is our top priority!   Salesplc spare parts supply chain ensures your optimization of the delivery cycle of industrial parts.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86-18030170117 plc@mvme.cn

Follow Us