BENTLY NEVADA 330103-00-04-10-01-05 Proximity Probes

BENTLY NEVADA 330103-00-04-10-01-05 Proximity Probes Specification

Manufacturer : Bently Nevada
Product No. : 330103-00-04-10-02-00
Product type : 3300 XL 8 mm Proximity Probes
Made in U.S.A
Can add on Certificate Of Origin (COO)
00 - Unthreaded Length Option : 0.0 in
04 - Overall Case Length Option : 40mm
10 - Total Length Option : 1.0 metre (3.3 feet)
02 - Connector and Cable-Type Option: Miniature coaxial ClickLocTM connector, standard cable
00 - Agency Approval Option : Not required
Probe Tip Material: Polyphenylene sulfide (PPS)
Probe Case Material: AISI 303 or 304 stainless steel (SST)
Weight : 0.423 Kg
Shipping Weight : 1.5 Kg
Country of Manufacture: United States (USA)

Demi looking forward to your inquiry !

Sales Manager:Demi            

Email:sales8@askplc.com   Skype: +86 18030235312     

Mob|Whatsapp|Wechat :+86 18030235312

About the BENTLY NEVADA 330103-00-04-10-01-05 Proximity Probes

Features:
For use in Tight Installation Requirements
Replaces 3300 RAM Transducer Systems and 3000-Series or 7000-Series 190 Transducer System
Average Scale Factor of 7.87 V/mm (200 mV/mil)
The Bently Nevada 3300 XL NSv Proximity Transducer System is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors and other machines with tight installation requirements. The 3300 XL NSv Proximity Transducer System consists of:
• a 3300 NSv probe
• a 3300 NSv extension cable
• a 3300 XL NSv Proximitor Sensor.

The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It is primarily used in the following applications on fluid-filmed bearing machines where a small shaft or reduced side-view is present:
• Radial vibration and radial position measurements
• Axial (thrust) position measurements
• Tachometer and zero speed measurements
• Phase reference (Keyphasor) signals.

The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable, and monitoring system with 3300 XL NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, extension cable and Proximitor Sensor with NSv components.

The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm (200 mV/mil), which is the most common output for eddy current transducers. Its enhanced side-view and small target characteristics give it a shorter linear range than the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System. With The 1.5 mm (60 mils) of linear range exceeds the linear range of the 3000-series 190 Transducer System.

Frequently Asked Questions BENTLY NEVADA 330103-00-04-10-01-05

Q: What is the BENTLY NEVADA 330103-00-04-10-01-05? 

A: It is a 3300 XL 8mm Proximity Sensor System.

Q: What are the components of this BENTLY NEVADA 330103-00-04-10-01-05 system? 

A: The system includes a 3300 XL 8mm probe, a 3300 XL extension cable, and a 3300 XL Proximitor sensor.

Q: What is the main function of this BENTLY NEVADA 330103-00-04-10-01-05 system? 

A: The system provides an output voltage proportional to the distance between the probe tip and the observed conductive surface for measuring static (position) and dynamic (vibration) values.

Q: What types of BENTLY NEVADA 330103-00-04-10-01-05 measurements is it primarily used for?
A: Primarily for vibration and position measurements on fluid film bearing machines, and Keyphasor reference and velocity measurements.

Q: How does the BENTLY NEVADA 330103-00-04-10-01-05 system perform?
A: The 3300 XL 8mm system represents advanced performance in eddy current proximity sensor systems.

Q: What standards does BENTLY NEVADA 330103-00-04-10-01-05 meet? 
A: It fully complies with the American Petroleum Institute (API) 670 standard, including mechanical configuration, linear range, accuracy and temperature stability.

Our service

1. High quality 
2. Timely delivery
3.100% new and original
5. We provide a large number of branded parts.
6. We have experienced employees and extensive testing facilities.
7. There is a lot of inventory. 

Hot selling models