ABB MDO32BNS 32-Channel Digital Output Module

ABB MDO32BNS 32-Channel Digital Output Module Specification

Model:MDO32BNS
Channels :32
Architecture: TMR
Indicators: Input Module
Dimensions: 32 x 26 x 70 mm
Weight: 520 g
Voltage range: 18 to 30Vdc (24V nominal)
Voltage: drop Less than 2Vdc
Maximum drive: 1A per channel
Output rating 0.01A minimum: 24Vdc, 1.0A maximum 
Note: The minimum current increases to 0.02A

Demi will give you best pricce !

Sales Manager:Demi Li             Email:sales8@askplc.com   
Mob/Whatsapp/Wechat :+86 18030235312    Skype: +86 18030235312   

About the ABB MDO32BNS 32-Channel Digital Output Module

The ABB MDO32BNS Digital Output Module provides the output control interface between the SC300E
processing environment and up to 32 common low voltage field devices. All field outputs from
the MDO32BNS module are galvanically isolated from the system.
Circuit triplication and voting procedures make the module single-fault tolerant and latent
testing ensures that the failure of a normally ‘ON’ (energised) or ‘OFF’ channel will be
recognised and reported to the system. Front panel indicators show the state of all channels,
the circuit ‘on-line’ status and the health of the module.
The module, which is compatible with ‘dual-slot hot repair’, can be fitted in any of the ten I/O
slots in the SC300E chassis, ‘wrong slotting’ is prevented by physical coding. The SC300E
system software identifies the module via a built-in hardware identifier.
Channel outputs leave the module via the DIN 41612 ‘rear plug-up’ system on the chassis
backplane.
This document is intended to provide a general understanding of the function of the MDO32BNS Digital
Output Module sufficient to enable basic maintenance operations to be effected in the field.

Q: What is MDO32BNS? 
A: MDO32BNS is a digital output module produced by ABB for industrial.

Q: What are the main functions of MDO32BNS? 
A: This module is mainly used to control various electrical devices and processes in programmable logic controller (PLC) systems. It has 32 discrete outputs and is suitable for a variety of tasks.

Q: What are the dimensions and weight of MDO32BNS? 
A: The dimensions are 32 x 26 x 70 mm and the weight is 520 grams.

Q: What is the operating voltage range of MDO32BNS? 
A: The module operates in the range of 18 to 30 V DC.

Q: What is the output current capability of MDO32BNS? 
A: It can drive the maximum current of each channel and is compatible with a variety of loads.

Q: Does MDO32BNS have an isolation voltage function? 
A: Yes, it has an isolation voltage function to protect the module and connected devices.

Hot selling module

Our company sells new and surplus products and develops channels to purchase such products. This site is not approved or endorsed by any of the listed manufacturers or trademarks.Our company is not an authorized distributor, dealer or representative of the products displayed on this site.All product names, trademarks, brands and logos used on this site are the property of their respective owners.The description, illustration or sale of products under these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.