330103-00-10-10-01-05 | Bently Nevada 3300 XL Proximity Probe

330103-00-10-10-01-05 | Bently Nevada 3300 XL Proximity Probe

King is always online！welcome to call for inquiry！

330103-00-10-10-01-05 | Bently Nevada 3300 XL Proximity Probe Key Features

The 3300 XL NSv sensor system has an average scale factor of 7.87 V/mm (200 mV/mil), which is the most common output of eddy current sensors. Its enhanced side view and small target characteristics allow it to have a shorter linear range than the Bently Nevada 3300 XL series 5 mm and 8 mm sensor systems.

System performance over ambient temperature range (0°C to 45°C)

Incremental scale factor (ISF) 7.87 V/mm (200 mV/mil) +12.5%/-20%, including interchangeability error when measuring in 0.25 mm (10 mil) increments over 1.5 mm (60 mil) linear range.

Deviation from best fit straight line (DSL) Less than ±0.06 mm (±2.3 mil).

Frequency response 0 to 10 kHz: +0, -3 dB typical with field wiring up to 305 m (1000 ft).

Target size (flat target)

Minimum: 8.9 mm (0.35 in) diameter Recommended minimum: 13 mm (0.5 in) diameter Axial position measurements on shafts smaller than 13 mm (0.5 in) diameter will typically result in a change in scale factor. Reducing the gap between the probe tip and the target will help limit the change in scale factor.

Shaft diameter minimum (standard X-Y probe configuration): 30 mm (1.2 in) minimum (23 mm (0.9 in) axial offset for X-Y proximity probes): Making 20 mm (0.8 in) measurements on shafts less than 30 mm (1.2 in) in diameter typically requires close spacing of radial vibration or axial position sensors. This creates the potential for the electromagnetic fields they emit to interact with them

 Main products

The advantage brands and series of our company are as follows:
Control Systems  (DCS, PLC/SPS, CNC)  
 -  Panel Controllers
 -  HMI and Display Panels
 -  Industrial PC’s
 -  Drives ( Frequency Inverter and Servo)
 -  Motors
 -  Power Supplies
 - Bentley Nevada 
1) Bently 3500 Monitoring system,
2) 3500 system / 3300 system monitoring and protection system, front-end eddy current sensor 

Bently Nevada Recommended model

NOTE: Sales Plc Limited sells new and surplus products and develops channels to purchase such products. This site is not approved or endorsed by any of the listed manufacturers or trademarks.Our Company is not an authorized distributor, dealer or representative of the products displayed on this site.All product names, trademarks, brands and logos used on this site are the property of their respective owners.The description, illustration or sale of products under these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.